Cause:
Wear of the OE pressure regulator valve casting bore and shuttle valve sleeve due to continuous valve oscillation prevents proper line pressure control.
Correction:
Install the drop-in Sonnax pressure regulator and shuttle valve kit with upgraded materials and increased critical valve-to-bore sealing engagements to restore hydraulic integrity and prevent future wear.
Vehicles with a GM 8L45 or 8L90 transmission may exhibit high or low line pressure that results in harsh/soft shifts, burnt clutches, loss of cooler and lube flow and overheating of the transmission and converter. These problems may be caused by wear of the pressure regulator bore casting at the VFS signal port area and/or at the shuttle valve sleeve. Wear at the inboard port of the pressure regulator bore allows VFS (throttle) signal pressure to leak, preventing proper action of the pressure regulator valve and potentially allowing it to remain in the low line pressure position. Wear of the shuttle sleeve due to continous oscillation of the shuttle valve creates a path for balance line pressure at the pressure regulator valve to exhaust, resulting in excessive low line pressure.
The Sonnax drop-in pressure regulator and shuttle valve kit restores hydraulic integrity to the lineup by addressing wear that subjects the transmission to either excessively high or low line pressure with upgraded materials and unique designs. The pressure regulator valve has been designed with a lengthened spring pocket spool at the VFS signal port area, which provides over double the sealing capability to this critical end of the valve and allows it to operate in unworn portions of the bore. The length of the critical shuttle valve diameter has been significantly lengthened to provide better sealing and durability of the assembly.
Symptoms:
Cause:
Wear of the OE pressure regulator valve casting bore and shuttle valve sleeve due to continuous valve oscillation prevents proper line pressure control.
Correction:
Install the drop-in Sonnax pressure regulator and shuttle valve kit with upgraded materials and increased critical valve-to-bore sealing engagements to restore hydraulic integrity and prevent future wear.
Vehicles with a GM 8L45 or 8L90 transmission may exhibit high or low line pressure that results in harsh/soft shifts, burnt clutches, loss of cooler and lube flow and overheating of the transmission and converter. These problems may be caused by wear of the pressure regulator bore casting at the VFS signal port area and/or at the shuttle valve sleeve. Wear at the inboard port of the pressure regulator bore allows VFS (throttle) signal pressure to leak, preventing proper action of the pressure regulator valve and potentially allowing it to remain in the low line pressure position. Wear of the shuttle sleeve due to continous oscillation of the shuttle valve creates a path for balance line pressure at the pressure regulator valve to exhaust, resulting in excessive low line pressure.
The Sonnax drop-in pressure regulator and shuttle valve kit restores hydraulic integrity to the lineup by addressing wear that subjects the transmission to either excessively high or low line pressure with upgraded materials and unique designs. The pressure regulator valve has been designed with a lengthened spring pocket spool at the VFS signal port area, which provides over double the sealing capability to this critical end of the valve and allows it to operate in unworn portions of the bore. The length of the critical shuttle valve diameter has been significantly lengthened to provide better sealing and durability of the assembly.
Contents:
SONNAX Installation Instructions