BUSH SUNGEAR FRONT & REAR 25.17mm SHAFT
# 99432

Bush Sungear Front & Rear 25.17mm Shaft

BUSH SUNGEAR FRONT & REAR 25.17mm SHAFT

Fits units with .991" (25.17mm) shafts only.

Symptoms:

  • B Clutch burned
  • Bushing wear
  • Bushing failure
  • Ratio codes

Cause:
OE bushing material composition allows premature wear.

Correction:
Install improved Sonnax sun gear shaft bushings to restore critical clearances and resist untimely wear.


Warning:
Caution: Use of an arbor press is required for correct installation. Do not use a hydraulic press or a bushing driver/hammer combination to install, as doing so will distort the bushing and cause fitment issues.


The OE sun gear shaft bushings located at front and rear of the sun gear shaft in ZF6HP26 and ZF6HP28 units have a tendency to wear out prematurely due to sub-optimal material composition. This wear can lead to bushing failure, pressure control codes, and burnt B clutches. This Sonnax sun gear shaft bushing features superior wear characteristics, eliminating premature deterioration for worry-free operation. The Sonnax bushing's upgraded material composition outperforms the OE bushing.

Specifications:

  • Bushing Style: Precision
  • Material: Bimetal
  • Housing Bore: 1.103"
  • Width: 0.394"
  • Shaft Dia.: 0.991"

Type of Product: Bushes
Qty Needed:
Years:
Alternative #:
Ask for price