Reverse Boost Valve Kit .490” Early Sonnax O Rings
LINE PRESS BOOSTER KIT 4L60E EARLY LB1
Early-style "long" boost sleeve, 1.907" length.
This line pressure booster kit fits early-style GM 4L60-E, 4L65-E and 4L70-E pumps. Sonnax hydraulic line pressure booster kits contain stronger pressure regulator springs and large ratio boost valves designed to work together to provide progressive pressure increases as driving conditions become more demanding.
Our pressure regulator springs are approximately 10% stronger than OE and more conservative in impact than other aftermarket kit springs. Large ratio boost valves provide higher pressure incrementally and when it is needed the most. The combination of these springs and valves in a Sonnax kit gives you the best of both worlds: a modest pressure increase at the low end, with a high-end pressure that is equal to or greater than that of other aftermarket kit springs.
Achieve shorter shifts and increased torque capacity without creating low-speed harshness
Improved band and clutch holding capacity for increased durability
Progressive pressure increase as driving conditions become more demanding
All the benefits of increased line pressure without overloading the pump at idle
Simple and affordable drop-in solution with no special tools or reaming required
Note:
Replaces early-style boost valve with "long" 1.907" sleeve. For applications with "short" 1.810" sleeve use 37793K-490. See instructions for additional application information.
Early-style "long" boost sleeve, 1.907" length.
This line pressure booster kit fits early-style GM 4L60-E, 4L65-E and 4L70-E pumps. Sonnax hydraulic line pressure booster kits contain stronger pressure regulator springs and large ratio boost valves designed to work together to provide progressive pressure increases as driving conditions become more demanding.
Our pressure regulator springs are approximately 10% stronger than OE and more conservative in impact than other aftermarket kit springs. Large ratio boost valves provide higher pressure incrementally and when it is needed the most. The combination of these springs and valves in a Sonnax kit gives you the best of both worlds: a modest pressure increase at the low end, with a high-end pressure that is equal to or greater than that of other aftermarket kit springs.
Note:
Replaces early-style boost valve with "long" 1.907" sleeve. For applications with "short" 1.810" sleeve use 37793K-490. See instructions for additional application information.
Contents:
SONNAX Installation Instructions
Eliminate Leakage & Optimize Performance with Sonnax O-Ringed Valves