Warning:
This part only fits PWM units, and mismatching PWM and non-PWM valves will cause rapid converter failure.
Symptoms:
No lockup
Code 894, 1870
Falls out of lockup when hot
Fluid blown out fill tube
Lockup immediately after 2nd gear
Cause:
Excessive pump bore-to-valve clearance allows TCC signal oil to leak past the spool, preventing lockup or causing lockup to disengage when hot. Additionally, converter feed can leak past the excessive clearance, combine with signal oil and cause premature lockup.
Correction:
These improved TCC apply valves with PTFE seals will eliminate bore cross leakage.
Updated stroke pressure eliminates TCC drift on apply and updated exhaust control
PTFE seal eliminates cross leaking of converter signal oil and converter feed oil
Sonnax kit works in both early- and late-style PWM pumps when used with included spring
Warning: This part only fits PWM units, and mismatching PWM and non-PWM valves will cause rapid converter failure.
Symptoms:
Cause: Excessive pump bore-to-valve clearance allows TCC signal oil to leak past the spool, preventing lockup or causing lockup to disengage when hot. Additionally, converter feed can leak past the excessive clearance, combine with signal oil and cause premature lockup.
Correction: These improved TCC apply valves with PTFE seals will eliminate bore cross leakage.
Contents:
SONNAX Installation Instructions